- PORTER CABLE FN250A REPAIR KIT SERIAL
- PORTER CABLE FN250A REPAIR KIT DRIVER
- PORTER CABLE FN250A REPAIR KIT MANUAL
DELTA (Las siguientes son marcas registradas de PORTER-CABLE.The following are trademarks of PORTER-CABLE Tool does nothing or Inadequate air supply. Use non-flammable cleaning solutions to wipe exterior of tool only if necessary.ġ2 2. Wipe tool clean and inspect for wear or damage. Correct all problems before placing the tool back in use. Never carry tool with finger on trigger.ġ1 CLEAN AND INSPECT DAIL Y Disconnect tool from air supply before cleaning and inspection. Keep fingers AWAY from trigger when not driving fasteners to avoid accidental firing. Never carry tool with finger on trigger: tool will fire a fastener if safety is bumped. The Fastener Guide must be used whenever driving fasteners that are less than 1 1 / 2 " long.ġ0 Remove finger from trigger when not driving fasteners. The Guide is held in place with a bolt and nut (B) Fig. 23 and 24, is factory installed on Model FN250A. Operator and others in work area MUST wear safety glasses with side shields.ĩ F ASTENER GUIDE A Fastener Guide (A) Fig. Only use approved Porter-Cable fasteners. Do not load fasteners with trigger or safety depressed. Always connect tool to air supply before loading fasteners (Fig. For personal safety and proper operation of this tool, read and understand tool labels and manual.Ĩ Never point tool at yourself or others.
PORTER CABLE FN250A REPAIR KIT MANUAL
Keep this manual available for use by all people assigned to use this tool.
Keep proper footing and balance at all times when using or handling the tool.ħ Employer must enforce compliance with the safety warnings and all other instructions contained in this manual. In “Contact Actuation Mode” tool will fire a fastener if safety is bumped while trigger is depressed. Remove finger from trigger when not driving fasteners. Only use air hose that is rated for a maximum working pressure of at least 150 PSI (10.3 BAR) or 150% of the maximum system pressure, which ever is greater.Ħ 21. Do not connect tool to pressure which potentially exceeds 200 PSI (13.7 BAR). These safety glasses must conform to ANSI Z87.ĥ Fig. Operator and others in work area MUST wear safety glasses with side shields. Failure to follow warnings could result in DEATH or SERIOUS INJURY. Read and understand tool labels and manual. indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.Ĥ 1. indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
PORTER CABLE FN250A REPAIR KIT SERIAL
_ Type _ Serial No.Ģ PORTER ✦ ✦ CABLE Porter-Cable Corporation 4825 Highway 45 North Jackson, TN 38305 Date of Manufacture: _ Fecha de fabricación:, Date de fabrication: Serial No: _.ģ indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Record these numbers in the spaces below and retain for future reference. plate is located on the main housing of the tool. Includes: (1) PCC601 Drill/Driver, (1) PCC641 Impact Driver, (1) PCC661 Circa Saw, (1) PCC671 Recap Saw, (1) PCC710 Oscillating Tool, (1) PCC701 Flashlight, (2) PCC681L 1.3AH Batteries, (1) Charger and Bag.Instruction manual The Model and Serial No. The PCC701 LED Flashlight helps to illuminate dark work areas. The A PCCW205B Orbital Sander has a detachable dust bag and a vacuum port. A PCC650 Jigsaw offers 3 orbital settings with a variable speed trigger (0-2,500 SPM). The PCC710 Oscillating Tool features a tool-free system making adjusting and changing accessories quick and easy, along with arable speed dial (8K-18K OPM).
Its compact design is ideal for cutting in tight spaces. The PCC671 Recap Saw delivers 3,000-SPM for fast cutting, and its tool-free blade clamp allows for quick and easy blade removal or insertion. The PCC661 Circa Saw offers a high-performance motor (3,700 RPM), 5-1/2-in 18-tooth carbide blade and bevelling shoe (50 degrees).
PORTER CABLE FN250A REPAIR KIT DRIVER
The PCC641 Impact Driver features a high-performance impact mechanism that produces 2,800-RPM, 3,100-BPM and 1,450-in-lbs of max torque for optimum power, with a quick release 1/4" hex head chuck for easy one-handed bit changes. The PCC601 Drill/Driver features 283 units watts out (UWO), 2-speed gearbox (0-350/0-1,500), 1/2-in chuck, and built in LED light. The PORTER CABLE PCCK6118 20V MAX* Lithium Ion 6 Tool Combo Kit features a Drill/Driver, Circular Saw, Recap Saw, Impact Driver, Oscillating Tool and light.
0 kommentar(er)
